TycoonGlobal

Tutorials

Your First Factory

Reading a recipe, sizing a line against city demand, the streak bonus that punishes recipe-switching, and when an upgrade stops paying.

Tutorials7 min readPublished 14 Oct 2026#tutorial#production

A factory in TycoonGlobal is three numbers: what it consumes, how long a cycle takes, and how much it makes per level per hour. Everything else follows.

Reading a recipe

Take FRESH_BREAD:

FieldValue
Inputs per output unit2.0 FLOUR + 1.0 WATER + 1.0 POWER
Cycle20 minutes
Base output per level per hour12.0
Reference price$16.50
Perishable24 hours

A level-5 bakery with no bonuses produces 12.0 x 5 = 60 loaves an hour. That draws 120 flour, 60 water and 60 power per hour from upstream.

Now check the mill. FLOUR yields 10.0 per level per hour and consumes 2.0 wheat plus 1.0 power per unit. To supply 120 flour an hour you need a level-12 mill, drawing 240 wheat an hour, which needs a level-20 wheat farm.

That chain is 37 building levels. You are well past the 16-level overhead threshold, paying +13.2% on every wage.

The lesson in that arithmetic

Deep chains are expensive in levels, and levels are the thing that costs you. This is why the design pushes toward buying your inputs rather than owning every step — see specialisation versus vertical integration.

For an opening company the right move is a short integrated chain sized small, not a long one sized big. A level-3 bakery drawing from a level-7 mill and a level-12 farm fits under the threshold and sells everything it makes.

Do not starve a plant

UnitsPerHour = BaseRate x Level x (1 + Biome + Guild + Streak)

A plant with no inputs produces nothing — but the design charges wages pro-rata on partial runs, and the economy simulator demonstrated how expensive full-shift wages on an idle plant are. It was the single largest driver of a 92% money-supply collapse in an early run.

For a player the same logic applies directly: a plant you cannot feed is a building you are paying for and not using. Size upstream capacity to match downstream draw before upgrading the downstream plant again.

Do not drown your own market

Equally important in the other direction. Check what your city absorbs.

A level-10 bakery produces 120 loaves an hour, 2,880 a day. If the city's target absorption is 1,200 a day, you are selling 2.4x target and earning roughly 0.78x of reference — and bread spoils in 24 hours, so the surplus is destroyed rather than stored.

Two fixes: run the bakery smaller, or deliver into more cities. Splitting 400 units across four cities at target earns close to 1.00x each; dumping 400 into one earns 0.61x. Freight is usually cheaper than that 39%.

The streak bonus

Streak = min(0.15, 0.03 x consecutive run days)

Five consecutive days on the same recipe is +15% output for free. It resets to zero whenever a building switches recipe.

That is a real cost on opportunism. Switching a plant to chase a price spike throws away up to 15% output and takes five days to rebuild. Build a second line instead of repurposing the first.

When an upgrade stops paying

Output is linear in level. Cost is geometric:

upgradeCost(tier, level) = 0.40 x buildCost(tier) x 1.25^(level-1)

For a Tier-1 building:

UpgradeCost
L1 to L2$1,400
L10 to L11$10,431
L20 to L21$97,144
L24 to L25$237,168
L1 to L25 total$1,180,240

Roughly 30—32% of every upgrade is burned construction materials — bricks, concrete, lumber, and steel beams from level 10 up — at every tier and every level.

The practical rule: upgrade the bottleneck, never the chain evenly. The building that constrains your output is the only one where another level produces more product. Upgrading a plant that is already waiting on inputs buys you nothing and raises your overhead.

Next

Reading the market covers buying the inputs you decided not to make.

The steps

  1. Read the recipeNote inputs per output unit, cycle time in minutes, and base output per level per hour. These three numbers determine everything about the line.
  2. Compute hourly outputMultiply base output per level per hour by building level and by one plus your biome, guild and streak bonuses.
  3. Compute input drawMultiply hourly output by the inputs per unit to find what the upstream buildings must supply each hour.
  4. Size upstream capacity to matchSet upstream building levels so their output meets the draw. An input-starved plant still pays wages pro-rata and wastes capital.
  5. Check city absorptionCompare hourly output against what the city absorbs in a 15-minute window. Producing well past target drives your own price down.
  6. Leave the recipe aloneA plant running the same product gains 3% output per consecutive day up to 15%. Switching recipe resets the streak to zero.
  7. Upgrade the bottleneck onlyUpgrade the single building that constrains the chain, not every building evenly. Cost scales geometrically while output scales linearly.